The Tenda PoE15F single injector enables the simultaneous transmission of power and data to through a single CAT5 or higher ethernet cable. All of this is achieved along with the support of the latest 802.3af standard. After installing the device to your network it completely eliminates the need for an electrical outlet near any active device. The injector is compatible with all PoE devices, ranging from wireless APs, IP cameras or IP phones and so on.
In addition, the TENDA PoE15F automatically detects whether the connected device is powered via PoE. If not, it sends only data whilst the power remains deactivated. This prevents damage to incompatible equipment. The high transmission speed of the individual LAN ports and its friendly levels of power consumption are additional advantages that will convince you of the usefulness of the injector in your network.
Standards: 802.3af, 802.3, 802.3u, 802.3ab
Transmission rate: 10/100mb/sec FD
Method of control: Without management
Network functions: Automatic detection of PD
Interfaces: 1 x Ethernet 100mb/sec LAN (PoE IN), 1 x Ethernet 100mb/sec LAN (PoE + Data OUT)
Housing material: Plastic
Input power: 230V AC
Power output: 48V DC 350mA (16.8W)
Operating temperature: 0° to 40°C
Dimensions (H x W x D): 132 x 60 x 34mm
1 × Tenda POE15F
1 x Quick Installation Guide (CZ, SK, PL)
1 x Power Cord