All-In-One USB 3.0 Adapter AXAGON ADSA-FP3 FASTport3 with SATA 6G interface for connecting any SATA drive or CD, DVD and Blu-ray drive. The 2.5 "HDD / SSD can be powered by a USB bus, 3.5" hard drives and 5.25 "optical drives can be powered by a packed power adapter adapter electronics to read SMART information monitoring the condition of connected drives.
The convenient FASTport 3 device easily and quickly connects any computer with any kind of SATA drive or other types of drive.
Supports all kinds of 2.5" HDD/SSD, 3.5" hard drives and 5.25" optical CD, DVD or Blu-ray drives.
It can handle all SATA, SATA II and SATA III drives without limitation on the maximum capacity.
ANY SIZE • ANY CAPACITY
The USB 3.0 interface guarantees seamless high-speed connectivity to all current computers.
The current SATA III / 6G interface allows for use of the speeds of modern SSDs.
USB 3.0 • SATA 6G
Reading S.M.A.R.T. information monitoring the condition of the connected drives.
Support for the connected drives and the adapter.
"Booting" option from a HDD/SSD connected device via FASTport 3 adapter.
HDD SMART INFO • AUTO SPIN DOWN • BOOT SUPPORT
Automatic installation makes everything very easy. The drivers are included in the operating systems and installed completely automatically.
A USB cable firmly connected to the computer is always ready for use and will not be lost.
The 2.5" HDD/SSD adapter just needs to be powered on the USB bus, making sure that the power adapter is out of the box.
AUTO INSTALL • FIXED USB CABLE • USB POWER
Clean, minimalist design, slim and lightweight body.
The bright blue LED indicates power and data transfer.
PURE DESIGN • SLIM CASE • DELICATE BLUE LED
1x USB 3.0
Ports: 1x SATA 6G
Format: 2.5" HDD, SSD, 3.5" HDD, 5.25" optical drives CD, DVD, Blu-ray
external power adapter 12V/2A
Compatible with USB 3.0, backward compatible with USB 2.0.
Supports transfer speeds of 12/480/5000 Mbit/s (full / high / super speed).
Support for 2.5" SATA III/II/I discs without limitation of maximum capacity.
Compliant with Serial ATA 3.1 specification (SATA/600), transmission speeds up to 6Gbps.
Compliant with Serial ATA 2.0 specification (SATA/300), transfer rates up to 3Gbps (300 MB/s).
Complies with Serial ATA 1.0 specification (SATA/150), transmission speeds up to 1.5Gbps (150MB/s).
The total bandwidth/bit rate of the adapter is determined by the USB 3.0 interface used (theoretically 5Gbit/s).
Boot support from an SSD/HDD connected via a USB adapter.
Supports HDD autostop - suspends connected disks when idle.
Hot Plug support can be connected while running.
Full plug and play support.
Connection via direct USB 3.0 type A male connector to a 12cm long cable that is firmly connected to the adapter.
Power and indication:
A bright blue LED that indicates the connection of USB power (permanent light) and data transmission (blinking).
Power over USB 3.0 bus up to 900mA from one USB port is enough for a 2.5" HDD/SSD.
A 12V - 2A (24W) external AC/DC adapter with a 150cm lead is attached to power the 3.5" or optical drive adapter.
Dimensions of USB adapter 71 x 46 x 14.3mm, weight of adapter only 39g incl. USB cable.
Supported Operating Systems:
MS Windows XP/Vista/7/8/10 and later, Windows Server 2003/2008/2012 and later (all 32-bit and 64-bit versions of Windows OS supported), Mac OS X 10.x and higher, Linux 2.6.x and higher.
Note: Drivers are included with supported operating systems and install completely automatically. No other drivers need to be installed and are not available.
USB 3.0 - SATA 6G adapter incl. USB 3.0 cable length 12cm and power adapter 100-240V / 12V-2A.