Refresh the page

AXAGON ADSA-FP2 FASTport2

€8.98
€7.42 without VAT

AXAGON ADSA-FP2 FASTport2

The FASTport 2 quickly and easily allows you to connect to your computer to any 2.5" SATA hard disk or SSD.
It supports all SATA, SATA II and SATA III 2.5" drives without limitation on the maximum capacity.
AN ideal tool for data migration.

ANY 2.5" HDD/SSD • ANY CAPACITY • DATA MIGRATION


The USB 3.0 interface guarantees seamless high-speed connectivity to all modern computers.
The current SATA III/6G interface with UASP support allows you to enjoy the speed of modern SSD drives.

USB 3.0 • SATA 6G • UASP


Reading S.M.A.R.T. information monitoring the condition of the connected drives.
Support for the connected drives and the adapter.
"Booting" option from a HDD/SSD connected device via FASTport 2 adapter.

HDD SMART INFO • AUTO SPIN DOWN • BOOT SUPPORT


Automatic installation makes everything very easy. The drivers are included in the operating systems and installed completely automatically.
A USB cable firmly connected to the computer is always ready for use and will not be lost.
The 2.5" HDD/SSD adapter just needs to be powered on the USB bus, making sure that the power adapter is out of the box.

AUTO INSTALL • FIXED USB CABLE • USB POWER


Clean, minimalist design, slim and lightweight body.
The bright blue LED indicates power and data transfer.

PURE DESIGN • SLIM CASE • DELICATE BLUE LED


Input interface:
1x USB 3.0

Device support:
Ports: 1x SATA 6G
Format: 2.5" HDD, SSD

Power supply:
via the USB bus

Properties:
Compatible with USB 3.0, backward compatible with USB 2.0.
Supports transfer speeds of 12/480/5000Mbit/s (full / high / super speed).
Support for 2.5" SATA III / II / I discs without limitation of maximum capacity.
Compliant with Serial ATA 3.1 specification (SATA / 600), transmission speeds up to 6Gbps.
Compliant with Serial ATA 2.0 specification (SATA / 300), transfer rates up to 3Gbps (300MB/s).
Complies with Serial ATA 1.0 specification (SATA / 150), transmission speeds up to 1.5Gbps (150MB/s).
The total bandwidth / bit rate of the adapter is determined by the USB 3.0 interface used (theoretically 5Gbit/s).
UASP (USB Attached SCSI Protocol) support.
Boot support from an SSD / HDD connected via a USB adapter.
Supports HDD autostop - suspends connected disks when idle.
Hot Plug support can be connected while running.
Full plug and play support.
Connection via direct USB 3.0 type A male connector to a 12cm long cable that is firmly connected to the adapter.

Power and indication:
Supplying from USB 3.0 to up to 900mA from one USB port is sufficient in all cases.
A bright blue LED that indicates the connection of USB power (permanent light) and data transmission (blinking).

More information:
Adapter dimensions 71 x 46 x 14.3mm, Adapter weight only 37g incl. USB cable.

Supported Operating Systems:
MS Windows XP / Vista / 7 / 8 / 10 and later, Windows Server 2003/2008/2012 and later (all 32-bit and 64-bit versions of Windows OS supported), Mac OS X 10.x and higher, Linux 2.6. x and higher.
Note: Drivers are included with supported operating systems and install completely automatically. No other drivers need to be installed and are not available.

Package contains:
USB 3.0 - SATA 6G adapter incl. USB 3.0 cable length 12cm.

 
4.6
Reviewed by 115 customers
5 000+
customers have purchased
90 %
customers recommend
2
User Review
All ratings

Specifications

Use

Use External

Connection

Controller connection to the PC USB 3.0 (3.1 gen1)
Control inputs/outputs Serial ATA III, SATA III
Transfer speed 5,000 Mb/s
Code:  AG200b03
Warranty: 24 months
Product Number:  ADSA-FP2
P-DC1-WEB20