DisplayPort -> AXAGON RVD-HI HDMI Active Adapter for HDMI / TV / Projector Connection to a Computer with DiplayPort Output. A hardware converter without the need for any installation or setup will ensure good image and sound transmission up to 1920x1200 resolution. The reduction is only one-way, ie the converter from DisplayPort to HDMI, not vice versa.
The handy small converter quickly and easily solves the problem of connecting a screen/TV/projector with the HDMI input to a computer with a DisplayPort output.
The transmitter also transmits sound without a quality loss and does not require any external power supply.
The adapter is one way only, i.e. converts from DisplayPort to HDMI, not vice versa.
DP INPUT • HDMI OUTPUT • AUDIO PASS-THROUGH
A hardware converter without the need for any installation or setup ensures high-quality video and audio transmission up to 1920x1200 at 60Hz. The adapter also supports all of the lower resolutions.
Mirroring as well as the extension of the primary monitor area are supported.
WUXGA 1920x1200 max • Mirrored Desktop • Extended Desktop
• Plug the converter directly into the computer's DisplayPort connector.
• Connect the HDMI cable from a screen, TV, or a projector to the HDMI output connector of the converter.
• The converter becomes operational at the moment the computer is turned on, and no drivers need to be installed.
• Turn on the display and adjust the input to HDMI.
• The image appears on the screening device.
• Set DisplayPort output as the default sound playback device (install audio drivers for your computer's graphics card if needed).
DP connector with latch (M) male (male)
connector latch control button
HDMI A (F) female connector (Female)
SVGA 800 x 600 (4:3), XGA 1024 x 768 (4:3), XGA+ 1152 x 864 (4:3), 1280 x 600, HD/WXGA/720p 1280 x 720 (16:9), WXGA 1280 x 768 (5:3), WXGA 1280 x 800 (16:10), SXGA- 1280 x 960 (4:3), SXGA 1280 x 1024 (5:4), 1360 x 768, WXGA 1366 x 768 (16:9), SXGA+ 1400 x 1050 (4:3), WXGA+ 1440 x 900 (16:10), HD+ 1600 x 900 (16:9), UXGA 1600 x 1200 (4:3), WSXGA+ 1680 x 1050 (16:10), Full HD/1080p - 1920 x 1080 (16:9), WUXGA 1920 x 1200 (16:10)
Supports audio transmission.
DDC (Display Data Channel) support - an intelligent setting of the resolution, frequency and other parameters by the source graphics chip.
Supported modes: mirroring the primary monitor area (default setting), expanding the primary monitor area.
HPD (Hot-Plug-Detect) support - Communication sequence to control connection/disconnection of the device while it is running.
Supports power saving modes controlled by the source equipment (PC) and the display device (monitor/TV).
Bus power source - no external power source is required.
Gold-plated connectors for perfect contact and oxidation-reduction.
NXP PTN3361BBS chip used.
Hardware-only converter for all operating systems without driver installation.
Miniature dimensions 56 x 24 x 12mm.
Weight only 12g.
Packaging in cardboard box contains:
DisplayPort -> HDMI active adapter