Refresh the page

AXAGON ADSA-1S SLIMport

€7.80
€6.45 without VAT

AXAGON ADSA-1S SLIMport

The Compact Adapter AXAGON ADSA-1S SLIMport with USB 2.0 interface is designed for easy connection for all 2.5 SATA drives up to 9.5mm in height. It can handle all SATA, SATA II AND SATA III 2.5" hard drives and SSDs, without any limits to maximum capacity. AXAGON SLIMport is a small but very handy tool for data migration, disk testing, back up and many other purposes. 

ANY 7 & 9.5mm 2.5" HDD/SSD • ANY CAPACITY • UNIVERSAL USE

Installing a disc is really part of the moment. The disk simply plugs directly into the SATA connector of the adapter. The kit can be connected directly to the PC, or even before inserting it into the protective case. No screws, just a few simple steps

THE FASTEST & EASIEST ASSEMBLY • SCREWLESS

The case holds a standard 2.5" drive with a USB adapter attached. It can also be used to transport or store the adapter itself without the disc and the cable inside the case. Minimum dimensions and weight make the product even for occasional mobile use.

PRACTICAL CASE • MINI & LIGHTWEIGHT • MOBILE

 A slim and lightweight body of clean, minimalist design. A pleasant matte finish. The bright blue LED indicates power and data transfer.

PURE DESIGN • SLIM CASE • MATTE FINISH • DELICATE BLUE LED

Reading SMART information monitoring the condition of an external disk. Supports sleeping of connected discs and box. Boot your computer from an SSD or hard drive in an external box.

HDD S.M.A.R.T. INFO • AUTO SPIN DOWN • BOOT SUPPORT

Automatic layout can be handled by a complete layman. Drivers are included in operating systems and are installed completely automatically. The USB cable is firmly connected to the computer; is always ready for use and will not be lost. The box power supply with USB bus is without an external power supply.
 
AUTO INSTALL • FIXED USB CABLE • USB POWER
 
                           Input interface:
                               1x USB 2.0
 
                       Device support ports:
                             Ports: 1x SATA
                        Format: 2.5" HDD, SSD
 
 
                              Power supply:
                                 via USB bus
 
 
                                Features:
Fully compatible with USB 2.0 and back-compatible with USB 1.1.
Supports transmission speeds 12/480Mbit / s (full / high speed).
Support for 2.5 "SATA III / II / I drives for all capacities.
Complies with Serial ATA 2.0 specification (SATA / 300), transmission speeds up to 3GB / s (300MB / s).
Complies with Serial ATA 1.0 specification (SATA / 150), transmission speeds up to 1.5GB / s (150MB / s).
Overall through-put / data rate adapter used is given by the USB 2.0 interface (theor. 480Mbit / s).
Support booting from the disk connected via USB adapter.
The ability to connect devices running thanks to the support Hot Plug.
Full support for plug and play.
Direct connection via USB type A male connector on the 20 cm long cable attached to an adapter.
Power over USB.
Blue LED indicating connection to the computer's USB port (continuous light) and data transmission (flashing).

 

                       Further information:
Compact adapter dimensions 70 x 21 x 11mm, weight only 17g including a 20cm long USB cable. Simple plastic case holds 2.5" disk, height of max 9.5mm with USB adapter attached (USB cable is through a hole in the case) For thick 7mm SSD / HDD foam padded for better fastening in the case.The case can also serve for transportation or storage of the adapter without disk including USB cable inside the case Dimensions of case 122 x 78 x 19mm, weight 40g.

                Supported operating systems:
MS Windows XP / Vista / 7/8 / 8.1 / 10 and later, Windows Server 2003/2008/2012/2016 and later (supported by all 32- and 64-bit versions of Windows), Mac OS X 10. x and higher, Linux with kernel 2.6.x and higher. Note: Drivers are included with supported operating systems and installed completely automatically. No other drivers need to be installed and are not available.

                        Package includes:

USB - SATA adapter with a 20cm hard cable, self - adhesive foam pads for 7mm HDD and SSD, plastic case.

4.7
563 customers rated
10 000+
customers have purchased
90 %
customers recommend
All ratings

Specifications

Features

Cable length 0.2 m

Supported drives

Supported disk formats 2.5"
Maximum disc height 9.5 mm

Connectors

External interface USB 2.0
External connectors USB-A
Code:  AG200b0
Warranty: 24 months
Product Number:  ADSA-1S
WEB10